DMX Power Catalog
DIN Mount Breaker
Accessory
DC circuit breakers that clip onto the DIN rail inside the MP (Magnum Panel) and MMP (Mini Magnum Panel) enclosures, providing overcurrent protection and a disconnect for charge controllers and DC loads. Each takes a 1" opening in the panel's front cover.
Overview
- BR-DC…-DIN — two-pole parallel breaker rated 125 VDC, with wire terminals at each end. Wire 14–1/0 AWG, torque 28 in-lb.
- BR-PV…-DIN — two-pole series breaker rated 250 VDC, with pressure terminals at one end; used between a PV array and the charge controller. Wire 18–2 AWG, torque 20 in-lb.
Hydraulic-magnetic and 100% rated. UL489A listed, VDE (EN 60947-2) approved and CE certified. The terminals need solid wire or a ferrule. The breakers are polarity sensitive and must be mounted vertically — see the instruction sheet before wiring.
Models
- BR-PV10-DIN — 10 amps, 250 VDC, DIN Mount.
- BR-PV15-DIN — 15 amps, 250 VDC, DIN Mount.
- BR-PV20-DIN — 20 amps, 250 VDC, DIN Mount.
- BR-PV30-DIN — 30 amps, 250 VDC, DIN Mount.
- BR-PV40-DIN — 40 amps, 250 VDC, DIN Mount.
- BR-PV50-DIN — 50 amps, 250 VDC, DIN Mount.
- BR-DC100-DIN — 100 amps, 125 VDC, DIN Mount.
Works with
- MMP Panel System
- MPSL Panel System
- MPSH Panel System
- MPDH Panel System
- MMP-E Panel System
- MPSL-PE Panel System
- MPDH-PE Panel System
- MPX Kits
- MPX-PE Kits
Models & Specifications
Full specifications for every model.
| Model | Amperage | Manual | Warranty |
|---|---|---|---|
| BR-PV10-DIN Discontinued | 10 A | ||
| BR-PV15-DIN Discontinued | 15 A | ||
| BR-PV20-DIN Discontinued | 20 A | ||
| BR-PV30-DIN Discontinued | 30 A | ||
| BR-PV40-DIN Discontinued | 40 A | ||
| BR-PV50-DIN Discontinued | 50 A | ||
| BR-DC100-DIN Discontinued | 100 A |